1. Design: Aquachannel is a pre-formed, one-piece drainage system that is made of high-density polyethylene (HDPE). It comes in a variety of sizes and features a built-in water collection channel. The pre-formed design makes installation relatively easy and straightforward. Waterguard, on the other hand, is a drainage system that uses a specialized drain pipe with a hollow core design. The pipe is usually made of PVC or HDPE and has perforations or slits along its length to allow water to enter.
2. Installation method: Aquachannel installation involves excavating a trench around the perimeter of the area to be drained and then placing the pre-formed channel in the trench. The channel is typically positioned next to the foundation footing, and the trench is backfilled with gravel or other suitable drainage material. Waterguard, on the other hand, requires cutting a narrow trench along the foundation wall, typically at a slight slope, and placing the drain pipe within this trench. The trench is then filled with gravel or other aggregate material to allow for efficient drainage.
3. Water collection: Aqua Channel has a built-in channel that collects water and directs it towards a sump pump or other drainage outlet. The water enters the channel through gravity flow or via drainage openings in the surrounding soil. From the channel, the collected water is channeled to a sump pump pit or another drainage point for removal. Waterguard collects water through the perforations or slits along its hollow core. As water enters the pipe, it is transported through the pipe and directed to a sump pump or drain outlet.
4. Maintenance: Aqua Channel requires periodic maintenance to clean out any debris, silt, or sediment that may accumulate in the collection channel. Accumulated debris can hinder the smooth flow of water, leading to drainage problems. Waterguard requires regular inspection to ensure proper function and the removal of any obstructions that may affect water flow. This may include clearing out any clogs or blockages caused by debris or soil.
5. Compatibility: Aqua Channel is typically used in conjunction with a sump pump system to effectively remove the collected water from the drainage channel. The sump pump is commonly installed in a sump pit at a low point in the system, and it automatically pumps out the accumulated water when it reaches a certain level. Waterguard can also be used with a sump pump system if desired, but it can also be connected to storm sewers, gravity outlets, or other drainage options depending on local regulations and the specific drainage requirements.
It's important to keep in mind that both Aqua Channel and Waterguard are effective drainage systems, but the choice between them may depend on factors such as soil conditions, the extent of water infiltration, installation preferences, and the availability of suitable drainage outlets. Professional advice should be sought to evaluate your specific situation and determine the most suitable drainage system for your needs.